New Waygate Krautkramer USM 36 Ultrasonic Flaw Detector 

The Waygate Technologies Krautkramer USM 36 Ultrasonic Flaw Detector, a Baker Hughes business product (formerly GE Inspection Technologies),  is the most versatile ultrasonic flaw detector on the market thanks to its ability to operate in DAC, AWS and DGS modes and with applications including weld inspections, thickness measurements, corrosion measurement, forging inspections and other inspections for difficult materials. The industries where the Waygate Technologies Krautkramer USM 36 proves useful include the automobile, power generation, petrochemical, and aerospace industries.

Available in Three Versions:

The USM 36 Ultrasonic Flaw Detector is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate Waygate's patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. Another feature included is the 7" screen that makes viewing A-Scans efficient, with signals being easily viewed even in bright sunlight as well as flexible data storage with removable SD cards or USB ports.


Applications:

Weld Inspection in the Power Generation and Petrochemical Industries

Intuitive tools facilitate analysis and the use of color on the ultra-bright, 7 inch screen allows significant display benefits during weld inspection:

  • Monitor gates and curves are displayed in various colors
  • Messages and alarms are displayed in red
  • A-scans can be displayed in different colors to assist comparison
  • Color display of all parameters involved in flaw location, including sound path, surface distance, depth position and leg number
  • Patented color coded display of legs for angle beam inspection


Precise Thickness Measurement in the Automobile Industry

The Krautkramer USM 36 provides precise thickness measurement, as the sound path differences are measured very accurately at the peaks of an echo sequence.


Corrosion Measurement in the Power Generation and Petrochemical Industries

Corrosion measurement can be carried out using dual element probes, where the screen displays both the thickness measurement and the A-scan, ensuring maximum reliability. A minimum capture mode provides the thinnest measured reading at the end of a continuous scan. An auto-freeze function, which minimizes the probe's surface contact time, is used for measuring structures and components with hot surfaces.


Inspection of Forgings

The instrument's Phantom Echo Detection technology is used in the inspection of fine grained and long work pieces to ensure accurate detection of flaws but not Ghost Echoes.


Inspection of Special Materials

The powerful square wave pulsar which is an available option for the Krautkramer USM 36 provides excellent penetration of difficult materials, such as those sometimes used in the aerospace and automobile industries.

Largest Viewable A-Scan Display in its Class

An important improvement in the Krautkramer USM 36 is its large 7 inch screen, with an 800x480 pixel resolution. The entire area is available to display crispy A-scans, making it the best in its class. Signals can be easily viewed and accurately interpreted, even in bright sunlight, with tired eyes at the end of a long working day.


Simple and Efficient Operation

The Krautkramer USM 36 uses the familiar rotary knobs of previous models but the function keys have now been minimized into a simple, intuitive 6-key keyboard, allowing simple and efficient operation; Inspection set-up is also easy. Not only for technicians who have used USM Go or USM Go for previous inspections, as set-up data is transferable directly from these instruments, which share the same user interface. This commonality of interface also ensures a rapid learning curve for technicians familiar with the USM Go instruments.


Flexible Data Reporting and Storage

As well as easy-to-interpret the crispy A-scans, data reporting on the Krautkramer USM 36 can also include screen shots and A-scan videos, where A-scans can be recorded for subsequent analysis or to provide proof of inspection. All data is stored on a removable SD-card and reports can be in jpeg or BMP format.

Comprehensive Connectivity

Connectivity is a major feature of the Krautkramer USM 36. Data can be stored on removable SD-card or USB memory stick, either for record purposes or to allow data sharing. A VGA connection allows the instrument’s display to be shown on an external monitor or on a projector screen for training purposes.

Can be Used in the Harshest of Environments

The Krautkramer USM 36 is fully protected against dust and water ingress to IP66 and can be operated in ambient temperatures from -10°C to 55°C. It can be used in sandy deserts, frozen wastes and in the humid tropics. The new flaw detector weighs just 2.2 kg and is battery- or mains operated. Its Li-ion battery has an operating life of more than 13 hours, with an integrated battery charger for those longer shifts.


SPECIFICATION : 

Display
Display Shift ( Delay)–15 … 3,500 μs
Probe Delay0 … 1,000 μs
Velocity250 … 16,000 m/s
PRFAutomatically optimized 15 … 2,000 Hz,
3 automatic setting modes: Auto Low,
Auto Med, Auto High, Manual
Display Screen
Size Diagonal7"
Active Range (W x H)152.4 × 91.44 mm2
Resolution (W x H) 800 × 480 pixels
Range 4 … 14,108 mm (555“) for longitudinal wave
Connectors
Probe Connectors2 × LEMO-1 or 2 × BNC
USB InterfaceUSB type B connector
Service InterfaceLEMO-1B, 8 pin
Pulser
Pulser ModeSpike pulser, optionally: Square-wave pulser
Pulser Voltage (SQ Mode)120 … 300 V, in steps of 10 V with a tolerance
of 10%
Pulser Falling/Rising Timemax. 10 ns
Pulser Width (SQ Mode)30 … 500 ns, in steps of 10 ns
Pulser Amplitude (Spike Mode)low: 120 V, high: 300 V
Pulser Energy (Spike Mode)low: 30 nS, high: 100 nS
Damping50 ohms, 1000 ohms
Receiver
Digital GainDynamic range 110 dB, adjustable in steps of
0.2 dB
Analog Bandwidth0.5 … 20 MHz
Equivalent Input Noise<80 nV/√Hz
FiltersBroadband: 1-5 MHz / 2, 2.25 MHz / 4, 5 MHz /
10 MHz / 13, 15 MHz
RectificationPositive half-wave, negative half-wave,
full wave, RF signal
Gates
Independent GatesGates A and B (triggering by gate A),
Gate C (option, triggering by gate A or B)
Measurement ModePeak, Flank, J-FLANK, FIRST PEAK
Memory
Card SlotSD-card slot for all standard SD-cards
Capacity8 GB, SD-card
DatasetsUGO data structure in ASCII
ReportsJPG or BMP format
General
BatteryLi-Ion, operating time: 13 hours with full charge
Charging method (standard): internal with power adapter
Charging method (optional): external charger
Charge level: proportional charge level indicator
Power AdapterUniversal power supply unit 100 … 240 VAC,
50/60 Hz
Size (W x H x D)255 × 177 × 100 mm (10” × 7.0” × 3.9”)
Weight2.2 kg incl. battery
LanguagesBulgarian, Chinese, Czech, Dutch, English,
Finnish, French, German, Hungarian, Italian,
Japanese, Norwegian, Polish, Portuguese,
Romanian, Russian, Spanish, Swedish
Damp Heat and Humidity (Storage)EN 60068 Part 2-30
6 cycles: 9 hrs at 25°C up in 3 hrs to 55°C,
9 hrs at 55°C then down to 25°C in 3 hrs, at
93% humidity
VibrationEN 60068 Part 2-6
2g per axis, 5 … 150 Hz, 1 oct/min, 25 cycles
ShocksEN 60068 Part 2-27
1000 cycles per axis, 15 g, 11 ms, half-sine
EnclosureIP66 according to IEC 60529
Operating Temperature–10 … 55°C
Cold Operation–10°C for 16 hrs, 502.5 Procedure II
Heat Operation55°C for 16 hrs, 501.5 Procedure II
Storage Temperature–20 … 60°C, without battery
Cold Storage –20°C for 72 hrs, 502.5 Procedure I
Heat Storage70°C for 48 hrs, 501.5 Procedure I
Options
AWSAWS calibration tool, according to AWS D1.1
Structural Welding Code
DAC/JISDAC/CNDACDAC calibration tool, 16 points, according to EN
1712, EN 1713, EN 1714, ASTM E164, ASME,
ASME III, JIS Z3060, GB11345
TCG: 120 dB dynamic, 110 dB/μs slope
DGSDGS calibration tool, according to: EN 1712, EN
1713, EN 1714, ASTM E164
Data loggerGrid file creation
3GGate C
SWPFor pulser parameter optimization,
voltage setting 120 … 300 V in steps of 10 V,
pulse width setting 30 … 500 ns in steps of 10 ns
Phantom-PRFPhantom-PRF for the identification of erroneous
echoes caused by multiple
reflections in low-attenuation materials
BEABlackwall Echo Attenuation



Package Includes : 

  • Compact Ultrasonic Flaw Detector, basic version with Lemo-1 connectors
  • Lithium Ion Rechargeable Battery Pack
  • Lithium Ion Battery Charger /AC Power Supply for On-Board Charging
  • SD Card (2 GB)
  • USB Download Cable
  • Transport Case
  • Quick Reference Operating Card
  • Operating Manual on CD
  • Certificate Of Conformity 


Enquire now and get best price at GARANG STORE.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

New Waygate Krautkramer USM 36 Ultrasonic Flaw Detector

  • Product Code: USM36
  • Availability: In Stock
  • $3,745.00


Related Products

New GE Inspection Technologies USN 60 Flaw Detector

New GE Inspection Technologies USN 60 Flaw Detector

GE Inspection USN 60 Ultrasonic Flaw DetectorThe The GE Inspection Technologies USN 60 flaw detect..

$2,850.00

New Waygate Krautkramer Mentor UT Phased Array Flaw Detector

New Waygate Krautkramer Mentor UT Phased Array Flaw Detector

New Waygate Krautkramer Mentor UT Phased Array Flaw DetectorThe Waygate Technologies Krautkramer Men..

$5,560.00

New Waygate Krautkramer USM100 Ultrasonic Flaw Detector

New Waygate Krautkramer USM100 Ultrasonic Flaw Detector

New Waygate Krautkramer USM100 Ultrasonic Flaw Detector for saleThe new standard in flaw detection, ..

$3,150.00

New Waygate Krautkramer SpotVision  Portable PA Ultrasonic Flaw Detector

New Waygate Krautkramer SpotVision Portable PA Ultrasonic Flaw Detector

New Waygate Krautkramer SpotVision  Portable PA Ultrasonic Flaw Detector sale Waygate Tech..

$3,120.00