Sumitomo Type-82C is a direct core monitoring fusion splicer for ultra fast splicing in every environment.


  • Ultra fast splicing: 5 sec.
  • Ultra fast heating: 9 sec.
  • Automatic fiber identification (SMF, MMF, DSF, NZDSF, BIF, other).
  • Automatic arc calibration.
  • G.657 fiber auto-splice function.
  • Supports bi-directional splicing operation.
  • Dust-resistant, water-resistant and shock-proof.
  • Compact & lightweight device (only 1.9 kg).
  • Touch-screen operation.
  • Upgrades software via internet.
  • Remote interactive maintenance via internet.
  • Equipped with onboard user training video.

Technical Specifications

Optical fiber requirements
Silica glass
Profile typesSMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657), EDF
Fiber diameterCladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm
Applicable fiber or cable sizeup to φ1,000 µmDrop cable (2.0x3.1 mm), Indoor cable (2.0x2.0 mm)
Cleave length5~16 mm10 mm
Standard performance
Splice loss (typical)SMF: 0.01 dB, MMF: 0.01 dB, DSF: 0.034 dB, NZDSF: 0.03 dB
Splicing cycle time (typical)5 sec. (Quick mode), 7 sec. (SMF standard mode), 7 sec. (Auto mode)
Heating cycle time (typical)9 sec.
Splice & Heat cyclesApprox. 300
Fiber view & magnificationTwo CMOS cameras observation, 380X (zoom: 760X) for X or Y single axis view, 270X for both X & Y dual axis view
Splicing programsMax. 300
Heating programsMax. 100
Loss estimationProvided
Splice image capture / Splice data storage200 images / 10,000 splice data
Proof test1.96N (200 gf)
Universal clamps for 250µm, 900µm tight & loose buffer fiberProvided
Reversible coating clampsProvided
Dual automatic independent heatersProvided (US patent 7,412,146)
User-selectable heater clamp operationProvided
Onboard user training videoProvided
Automatic arc calibrationAutomatically compensates for environmental condition changes
Arc testProvided
Display of remaining Splice & Heat cyclesProvided (Battery mode)
Remote interactive maintenanceProvided
DC outputDC12 V (for JR-6)
USB portUSB 2.0 (mini-B type)
Storage mediaSD / SDHC memory card
Power supply
AC input100 ~ 240V, 50 / 60 Hz (ADC-1430)
DC input10 ~15 V
Battery moduleLi-ion 10.8 V, 6,400 mAh (BU-16)
Mechanical Parameters
5.0" touch screen color LCD display
128(W) x 154(D) x 130(H) mm (without anti-shock rubber)
1.9 kg (without battery), 2.2 kg (with battery)
Electrode life3,000 arc discharges
Operating conditionsAltitude 0~6,000 m, Temperature -10~+50°C, Humidity 0~95% (non-condensing), Wind velocity up to 15 m/s
Storage conditionsTemperature -40~+80°C, Humidity 0~95% (non-condensing), Battery -20~+30°C (long term)
Dust resistanceEquivalent to IP5x (Operates normally after 8 hours in a dust chamber (containing dust of particle size 25 µm or below
Water resistanceEquivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)
Shock resistanceDrop from 76cm on 5 faces (excluding top face)

Write a review

Note: HTML is not translated!
    Bad           Good

Sumitomo Type-82C Fiber Optic Fusion Splicer

  • Brand: Sumitomo
  • Product Code: Type-82C
  • Availability: In Stock
  • $4,850.00