New Pinpoint Microgage 2000 laser alignment and measurement system for sale.

The Microgage 2000 is the most adaptable alignment tool that maintains high precision measurement data while sitting in the palm of your hand. Built with versatility in mind, the Microgage 2000 functions in an array of ways offering value to any business or industry that favors simplicity brought to tedious alignment tasks. It quickly becomes an essential part of the way your team measures and performs.

How It Works
Modern measuring is no harder then extending your arm with Pinpoint’s 2000. Simplifying your laser alignment process, the Microgage 2000 bridges the gap between how your business used to measure and how you should measure now. Because measuring with the 2000 is as simple as aligning with a tape measure or piano wire, your team is able to get top-notch results minus the sag and faulty “accuracy” given by inferior measurement tools.

The laser transmitter projects a thin line of laser light to a digital receiver and a display for measuring displacement. Measurements as small as 0.0001 inch are displayed and the laser and receiver can be separated by as much as 120 feet for large industrial projects.

Components
3 primary components: 2000 laser transmitter, digital receiver & digital display

The laser housing contains a flat, machined aluminum base while a variety of mounting points are custom drilled into the sides. A collimated laser beam projects from the end of the laser housing unit, running parallel to the base and sides of the housing. A receiver picks up the laser beam allowing the handheld display to provide a digital readout showing the position of the laser beam on the receiver. If the laser transmitter and receiver are resting on a flat surface, the display will read zero. If the transmitter or receiver is raised off the surface, the differential position will then be displayed.

Accessories
Light, lean and whatever else it takes to get your alignment work done

Pinpoint’s Microgage 2000 alignment accessories go the extra mile to remove the pain from your alignment work. There are customizable fixtures for virtually all your alignment needs. Looking for parallel and bore alignment? There are several alignment accessories that will allow your team to collect these and other geometric parameters in a snap. Uncertain if there are systems and alignment accessories for applications beyond straightness and linear? Rest assured that the more focused lathe and spindle alignment applications are just as easy to measure with Pinpoint’s products.

Digital Display
The rugged LCD display module puts heavy-duty data in the palm of your hand

This robust, yet lightweight aluminum display module will become an integral component in your maintenance arsenal. Every member of your team will appreciate the rugged enclosure design that protects our highly sophisticated laser alignment system, capable of 2.5-micron measurement resolution. The superior engineering and design of our Microgage 2000 have allowed it to remain an industry staple for over 15 years.

Capture Software
Alignment data captured & used with pride

The Windows-based alignment software package is Pinpoint’s answer to retrieving production performance data faster and more efficiently. With the ability to analyze measurement data in a way that results in better organization and production data storage, your team spends less time on distracting tasks and more time on machinery performance. The alignment software comes on-board the 2000 display module and works with several PC packages and programs like Excel. The pre-installed routines and built-in instructions are customer favorites, having saved the pride of a multitude of professionals.

Compact Receiver
Measurement data captured with innovative precision without sacrificing common sense

This ultra-compact digital receiver is more than simply a micro accessory. It makes measuring displacement much easier. Combining the laser transmitter and the lightweight receiver with various optics and mounting accessories allows the Compact Receiver to measure a number of alignment parameters and take on just about any alignment task. Bore alignment and rudder post positioning are two examples of tasks that could be easily streamlined for your team.

Customization
Select the Right System. Then Make it Yours.

There can be an alignment system for every project but it’s how the system works for you that really matters. Pinpoint has a number of laser alignment models and alignment kits from which to choose. With interchangeable accessories, there are few limits and many options to retrieve the data you need. Require something custom made? Pinpoint’s engineers are capable of configuring a measurement system based on your specific needs. All parts are OEM and made in the U.S.A.

SPECIFICATION :
Measurement resolution: 0.0001 inch
Resolution with interface: 0.00005 inch
Measurement range: /- 0.230 inch
Operating distance: 0 to 60 feet
Enhanced operating distance: Up to 90 feet
Measurement accuracy: 1% of measurement
Laser characteristics: 670nm, laser diode
Laser beam accuracy: ≤ 2 Arc Seconds
Laser beam repeatability: ≤ 1 Arc Second
Suggested warm-up time: 5 minutes
Laser leveling vial: Bubble Type: < 15 Arc Seconds
Laser power: Battery Pack, 3 AA Batteries
Laser run time: 20 hours, continuous
Laser mounting: 1/4-20 & 10-32 threaded holes
Laser surface finish: Machined flat, anodized coating
Receiver display: LCD for reading, signals & icons
Receiver controls: Function, Up, Down, Power
Receiver units: Inch, millimeters, mils, custom
Connections: Receiver input, output interface
Receiver options: Interchangeable modules
Receiver interface: Serial RS232c
Receiver power: 9 volt battery
Receiver run time: 16 hours continuous
Receiver housing: Machined aluminum, anodized
Operating conditions: 30˚F to 130˚F (-1˚C to 55˚C)
Humidity 0 to 95%
non-condensing Dimensions:
Laser transmitter: 7.0” L x 1.25” W x 3.0” H
Receiver (standard): 2.0” L x 1.25” W x 2.5” H
Display unit: 8.0” L x 5.0” W x 1.5” H