New FIXTURLASER NXA Pro Laser Shaft Alignment System For Sale

A revolution in shaft alignment as well as a revolution in usability with the NXA Pro – a digital laser based shaft alignment system! The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.

Alignment Intelligence

The NXA Pro system represents over 30 years of laser-based shaft alignment innovation. Through Alignment Intelligence, maintenance professionals can do their jobs more efficiently and achieve better results.

Adaptive User Interface for Smart Sensors

You will be guided through the measurement and alignment process of your machines using the adaptive user interface of the NXA Pro.

OmniView

The graphical user interface is shown off on a 6,5” transreflective display screen with icons and symbols to guide you, in other words, no text is involved.

The adaptive user interface will guide you throughout the measurement and alignment process.

We have fitted the NXA Pro with gyros and can, therefore, adapt the screen view from the same side that the user is positioned – our OmniView™ function, i.e. the system knows where it is in relation to the machine.

VertiZontal Moves

The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time-strained maintenance world!

Power management system

The NXA Pro has a power management system that will make your life so much easier! The display unit has a 10 hour continuous battery operating time, and should the need arise during an alignment job; the display unit can be express charged to an 80% capacity in one hour. The sensor units will last for 24 hours minimum thanks to the long-life batteries.

Time-saving technology

The NXA Pro’s sensor units have graduated to the 2nd generation sensor. This sensor version improves the tolerance for detrimental external factors, such as vibrations and ambient light, and delivers the most accurate and precise measurement values compared to any other system. Measurement values are automatically registered throughout the entire measurement process. We have integrated line laser with the sensor and this combination virtually eliminates rough alignment, a huge time saver.

Very compact, only 33,5 mm in width, the sensor units will fit in the tightest spots. The sensor units contain long-life batteries, Bluetooth communication, and gyroscopes. The gyroscopes make it possible to measure according to the Tripoint Method in the vertical shaft alignment application, something that no other shaft alignment instrument is capable of!

NXA Pro – Package with Case

Display unit
2 pcs of digital smart sensors
2 pcs of complete V-brackets
2 pcs of magnetic V-brackets
2 pcs of chains 8 mm 60 links
Rod kit
Extension fixture, 49 mm
Magnetic base
Tape measure 5 m
2 pcs of angled universal tools
USB stick
Charger for display unit and sensors
NXA manual – English version

Techincal specification

NXA Pro*
Weight including all standard parts	7,7 kg (17 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, Water- (5m), Air-tight with air pressure compensation valve
Drop test (empty)	3m onto concrete floor
Storage Temp(empty)	-40 to 80 °C
Dimension	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing Material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	-10 to 50°C ( 14 to 122°F)
Battery Charging Temp, system off	0 to 38°C ( 32 to 100°F)
Battery Charging Temp, system on	0 to 32°C ( 32 to 90°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	1,2 kg (2,6 lbs) with battery
Dimensions	124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Processor	1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory	256 Mb
Flash storage memory	8 Gb >100 000 measurements
Display	Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size	6,5” (165mm) diagonal (133 x 100 mm)
Display resolution	Full VGA 640×480 pixels
Color depth	262 000 colors
Interface	6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible	1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible	1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time	10 hours continuous use (with 50% LCD backlight)
Battery Charging time (system off, room temperature)	5 h
Xpress Battery Charging time (system off, room temperature)	1 h charge – 5 hours operating time
LED indicators	Unit state and 2×5 battery state indicators with instant battery check

Digital Laser Sensors
Housing Material:	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp:	-10 to 50°C (14 to 122°F)
Storage Temp:	-20 to 70°C ( -4 to 158°F)
Long term storage temp:	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp:	0 to 40°C ( 32 to 104°F)
Relative humidity:	10 – 90%
Weight:	192 g (6,8 oz) with battery
Dimensions:	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection:	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e²)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10m
Detector	2^nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing:	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3 S3 unit)	14
Wireless communication:	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time:	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check

Shaft brackets
Fixture:	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material:	Anodized aluminum
Shaft diameter:	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods:	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)